Hp Deskjet 6988dt Printer User Manual Page 97

  • Download
  • Add to my manuals
  • Print
  • Page
    / 154
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 96
8. Push down on the print cartridge latch until it snaps closed.
9. Close the printer cover.
The printer automatically prints a calibration page.
For information about storing print cartridges, see Maintain print cartridges.
For information about recycling empty print cartridges, see Print cartridge recovery.
Warning Keep both new and used print cartridges out of the reach of children.
Set the auto-off feature
The printer is designed with an auto-off feature that automatically places the printer into
a low power mode when it has been idle for 30 minutes. In this mode, the printer continues
to consume a maximum 3.0 watts of power with the radio off (maximum 5.5 watts with
the radio on) and turns back on automatically when print jobs are sent to the printer. You
can manually turn the printer off by pressing and holding the Power button for three
seconds. When the printer is manually turned off, the printer uses less than one watt of
power. Manually powering off the printer is recommended if the printer causes
interference with other wireless devices, or if you do not plan to use the printer for a long
period of time.
Selecting auto-off cancels the FEMP energy savings mode.
Energy consumption can be prevented by turning the printer power off, and then
disconnecting the end of the printer power cord from the electrical source.
Follow these steps to activate the auto-off feature:
1. Open the HP Printer Utility.
2. Select Power Management.
3. Follow the onscreen instructions.
Align the print cartridges
The printer automatically aligns the print cartridges after a new print cartridge is installed.
You can also align the print cartridges at other times to ensure optimal print quality.
To align print cartridges:
User's guide 95
Page view 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 153 154

Comments to this Manuals

No comments