HP AA-RS2JA-TE User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 360
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
1–20 edge switch 2/16 service manual
General InformationI
RS-232 maintenance port.
Initial Machine Load Button
When the IML button (Figure 1–8) is pressed and held for three seconds, the switch
performs an IML that takes approximately 30 seconds and resets the:
Microprocessor and functional logic for the CTP card and loads firmware from
FLASH memory.
Ethernet LAN interface, causing the connection to the HAFM server to drop
momentarily until the connection automatically recovers.
Ports, causing all Fibre Channel connections to drop momentarily until the
connections automatically recover.
An IML should only be performed if a CTP card failure is indicated. Do not IML the
switch unless directed to do so by a procedural step or the next level of support. As a
precaution, the IML button is flush mounted to protect against accidental activation.
Ethernet LAN Connector
The front panel provides a 10/100 megabit per second (Mbps) RJ-45 twisted-pair
connector (Figure 1–8) that attaches to an Ethernet LAN to provide communication
with the HAFM server or an SNMP management workstation. Two green LEDs are
associated with the LAN connector. When illuminated, the left LED indicates LAN
operation at 10 Mbps, and the right LED indicates LAN operation at 100 Mbps.
Power and System Error LEDs
The PWR LED (Figure 1–8) illuminates when the switch is connected to facility AC
power and powered on. If the LED extinguishes, a facility power source, power cord,
or power distribution failure is indicated.
The ERR LED (Figure 1–8) illuminates when the switch detects an event requiring
immediate operator attention, such as a FRU failure. The LED remains illuminated as
long as an event is active. The LED extinguishes when the Clear System Error Light
function is selected from the product manager application. The LED blinks if unit
beaconing is enabled. An illuminated ERR LED (indicating a failure) takes
precedence over unit beaconing.
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 359 360

Comments to this Manuals

No comments