HP ZBook Studio G4 Base Model Mobile Workstation User Manual download pdf (Page 57)

Display cable

Description Spare part number

Display cable 840938-001

eDP bracket (included in Bracket Kit, spare part number 840966-001) 840966-001 (Bracket Kit)

Before removing the display cable, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the bottom cover (see Bottom cover on page 29).

5. Disconnect the battery cable from the system board (see Battery on page 41).

Remove the display cable:

1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the display cable to the computer.

2. Lift the eDP bracket from atop the connector (2).

3. Disconnect the cable from the system board (3).

4. Remove the cable from the clips along its routing path (4).

Reverse this procedure to install the display cable.

Component replacement procedures 45

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 181 182

No comments

HP ZBook Studio G4 Base Model Mobile Workstation User Manual Page 57