HP ZBook Studio G4 Base Model Mobile Workstation User Manual Page 61

  • Download
  • Add to my manuals
  • Print
  • Page
    / 182
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 60
I/O support bracket
Description Spare part number
I/O support bracket (included in Bracket Kit, spare part number 840966-001) 840966-001 (Bracket Kit)
Before removing the I/O support bracket, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 29).
5. Remove the battery (see Battery on page 41).
6. Remove the thermal module (see Thermal module on page 38).
7. Remove the display cable (see Display cable on page 45).
8. Remove the solid-state drive (see Solid-state drive (M.2) on page 31).
9. Remove the WLAN module (see WLAN module on page 33).
10. Remove the system board (see System board on page 46).
Remove the I/O support bracket:
Lift the I/O support bracket straight up and o the system board.
Reverse this procedure to install the I/O support bracket.
Component replacement procedures 49
Page view 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 181 182

Comments to this Manuals

No comments