HP ZBook Studio G4 Base Model Mobile Workstation User Manual download pdf (Page 43)

Solid-state drive (M.2)

Description Spare part number

Z Turbo drives, PCIe

1-TB, MLC 921029-001

512-GB, MLC 921032-001

512-GB, self-encrypting drive (SED), OPAL 2, TLC 921033-001

256-GB, TLC 921031-001

256-GB, MLC 921026-001

SATA-3 drives:

512-GB, FIPS, TLC 921028-001

256-GB, SATA-3, self-encrypting drive (SED), OPAL 2 921030-001

128-GB 921027-001

Solid-state drive bracket (included in Bracket Kit, spare part number 840966-001) 840966-001 (Bracket Kit)

The system board includes two M.2 solid-state drive connectors. Only use the connector shown by callout (1)

in the following image. Do not use the connector shown by callout (2).

Before removing the solid-state drive, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

Component replacement procedures 31

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 181 182

No comments

HP ZBook Studio G4 Base Model Mobile Workstation User Manual Page 43