HP ZBook Studio G4 Base Model Mobile Workstation User Manual download pdf (Page 65)

Display assembly

NOTE: The Dream Color display assembly and touch screen is spared as a whole unit assembly only. The

non-touch display assembly is spared at the subcomponent level only. For non-touch display assembly spare

part information, see the individual removal subsections.

Description Spare part number

15.6-in, UHD, UWVA, Dream Color display assembly not equipped with a camera 921034-001

15.6-in, UHD, UWVA, Dream Color display assembly equipped with a camera 921035-001

15.6-in, FHD, UWVA display assembly with a touch screen 921036-001

To remove the display assembly and access the LED display assembly subcomponents, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the bottom cover (see Bottom cover on page 29).

5. Remove the battery (see Battery on page 41).

6. Remove the thermal module (see Thermal module on page 38).

7. Remove the display cable (see Display cable on page 45).

8. Remove the solid-state drive (see Solid-state drive (M.2) on page 31).

9. Remove the WLAN module (see WLAN module on page 33).

10. Remove the system board (see System board on page 46).

Remove the display assembly:

1. Disconnect the antennas from the WLAN module (1), and then remove the antennas from the routing

path around the fan (2).

Component replacement procedures 53

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 181 182

No comments

HP ZBook Studio G4 Base Model Mobile Workstation User Manual Page 65