HP ZBook Studio G4 Base Model Mobile Workstation User Manual Page 90

  • Download
  • Add to my manuals
  • Print
  • Page
    / 182
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 89
These lights should be visible after removing the service door or bottom
cover. Consult with support for platform-specic locations of the lights.
Example: System board is good. Lights that turn on briey (< 1 second) and immediately turn o indicate
normal function. In this case, system (3.3V), power good (3.3V), and system reset (3.3V) are all good and
troubleshooting lights should not be lit. However, other external lights should be lit as normal
afterward.
Troubleshooting lights External lights Action Note
O On Do not replace system board No power-on issue
On O Replace board Power-on issue
Example: System board needs replacement. When (1) system 3.3V exists, but one power rail is bad then
(2) power good is low (0V), and troubleshooting lights will turn on.
After you press the system power button, troubleshooting lights will turn on for 5 seconds and turn
o. The system external lights will not light up. Follow general troubleshooting steps (i.e., remove
recently added hardware, test with minimum conguration, etc.) prior to replacing the system board.
Resolve the issue
8. Hard reset
A hard reset or forced reset (http://support.hp.com/us-en/document/c01684768) erases all information in
the computer's memory and may restore functionality. Resetting the computer forces the system to clear and
reestablish the connections between the BIOS and the hardware.
IMPORTANT: Battery removal is NOT necessary for a hard reset on G3 or G4 mobile workstations. Follow the
instructions for a computer with a non-removable battery.
78 Chapter 6 Troubleshooting guide
Page view 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 181 182

Comments to this Manuals

No comments