HP ZBook Studio G4 Base Model Mobile Workstation User Manual download pdf (Page 56)

TouchPad

Description Spare part number

TouchPad 840962-001

Before removing the TouchPad, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the bottom cover (see Bottom cover on page 29).

5. Remove the battery (see Battery on page 41).

Remove the TouchPad:

1. Disconnect the cable from the system board (1).

2. Remove the six Phillips PM2.0×2.0 screws (2) that secure the TouchPad to the top cover.

3. Lift the TouchPad out of the computer (3).

Reverse this procedure to install the TouchPad.

44 Chapter 5 Removal and replacement procedures for authorized service provider parts

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 181 182

No comments

HP ZBook Studio G4 Base Model Mobile Workstation User Manual Page 56