HP LQH-HW 3ULQWHUV User Manual download pdf (Page 78)

Chapter 4 Emulation Menu

Display Functns

• Disable. The default. Control characters are not printed.

• Enable. Control characters are printed before they get executed. This is a

useful debugging tool.

Line Terminator

You can specify what will be used to indicate the end of a line. Four options

are available: LF after CR, CR after LF, CR after FF, and CR after VT. Each of

these options may be enabled or disabled independent of one another.

PTX Linefeed

• Disable. The default. Linefeed is to be performed as calculated from the

bottom of the graphics or barcode, thereby disrupting the vertical text

alignment.

• Enable. The Linefeed moves to the next line as calculated from the Top

of Form position, thereby retaining vertical text alignment. When printing

graphics or bar codes, you may want to set the PTX Linefeed parameter

to Enable to maintain text alignment.

LPI Adjust

This parameter lets you specify the lines per inch (lpi) values: 6 LPI (the

default) or 8 LPI.

Page L. /Lines

This parameter lets you set physical page length in lines from 12 to 96 at 6 lpi,

or 16 to 128 at 8 cpi. The default is 66 lines at 6 lpi.

Linefeed

LINE 1

Linefeed

LINE 2

LINE 3

LINE 1

LINE 2

LINE 3

PTX Linefeed Enabled PTX Linefeed Disabled

Note If 6 lpi is selected, you will be able to scroll the menu to 128 (an invalid

length). However, when you press ENTER to select this value, the menu

will return with the maximum lines for 6 lpi (i.e., 96 lines). Similarly,

selecting too few lines for 8 lpi will cause the menu to return with 16 lines.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 303 304

No comments

HP LQH-HW 3ULQWHUV User Manual Page 78