HP LQH-HW 3ULQWHUV User Manual download pdf (Page 236)

236

Chapter 13 LineJet Print Server Security

Web Browser

1. Using a Web browser, direct the browser to URL

http://

LineJetIPaddress

/adminConf.html

(e.g.,

http://192.75.11.9/adminConf.html)

2. At the “Administration Configuration” HTML form that displays, scroll

down to the “Passwords” section.

3. Click within the “Old” field beside the “Root Password” heading and enter

the existing root password. By default, there is no root password so you

can go to the next step without typing anything in this field.

4. Within the “Root Password” section, click within the “New” field and enter

the new root password.

5. Within the “Root Password” section, click within the “Confirm” field and

enter the new root password again. Remember this is case sensitive.

6. Click on the SUBMIT button when done and physically repower the print

server to make the new setting takes effect.

From this point on, anytime you log in to the LineJet Print Server as

root,

you will need to specify this password or your login attempt will fail.

To clear this password or change it, use the same “Administration

Configuration” HTML form. Just enter the appropriate “Old” password and put

in the new one (or nothing if you do not want a root password any longer). The

commands directly on the LineJet Print Server are:

set user from default

save

Note If prompted for a User ID and password first, type in root for the user ID

and press ENTER at the password prompt since there is no password by

default.

Note Remember your password. If you forget it, the only way to recover your

password is as follows:

1. set Dipswitch 1 on the adapter to the “on” position

2. power up

3. set Dipswitch 1 to the “off” position

4. power up a second time.

You will also have to restore all IP values.

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 303 304

No comments

HP LQH-HW 3ULQWHUV User Manual Page 236