HP LQH-HW 3ULQWHUV User Manual download pdf (Page 30)

Chapter 1 LineJet Print Server

Network Indicator

The NET LED displays the status of the network link. When the NET LED is

on, link integrity is confirmed. The NET LED flashes off for 1/3 second when a

data packet is being transferred. When the NET LED is off, the network

connection has been severed.

Dipswitches

On the back of the interface, you will find a small window where you can

access two dipswitches labeled 1 and 2 (see Figure 4). The functions of the

dipswitches are explained in Table 3.

Table 3. Dipswitch Functions

Dipswitch

Comments

OFF OFF Normal operation. With both dipswitches in the OFF

position, the LineJet Print Server boots up using the

settings in flash memory rather than the default

settings.

ON OFF Factory default settings. With the dipswitches in this

configuration, the LineJet Print Server boots up and

erases all settings stored in flash memory except the

Ethernet address and key value.

OFF ON Default IP. With the dipswitches in this configuration,

the LineJet Print Server boots up with factory default

settings. However, the stored settings in flash memory

are intact. Setting dipswitch 2 to ON does not clear

any settings stored in flash memory; instead, it boots

the unit with the IP settings in flash memory

temporarily ignored.

ON ON Reserved. This dipswitch setting is not for customer

use.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 303 304

No comments

HP LQH-HW 3ULQWHUV User Manual Page 30