HP LQH-HW 3ULQWHUV User Manual download pdf (Page 259)

Fault Messages

259

Fault Messages

If a fault condition occurs in the printer, the status indicator on the control

panel flashes on and off, and the message display indicates the specific fault.

Fault messages are summarized in Table 21.

Displayed faults fall into one of two categories:

• Operator correctable

• Field service required

For operator correctable faults, follow the suggested corrective action in the

fault message description. After correcting the displayed fault, press the

CLEAR key to clear the error message and status indicator, and resume

printing. If the fault message reappears, contact your Hewlett-Packard

Customer Service Engineer.

Fault Messages Requiring Field Service Attention

For faults that require field service, do two things to try to clear the fault before

calling your Hewlett-Packard Customer Service Engineer:

1. Set the printer power switch to O (off), wait 15 seconds, then turn the

printer on again. Run your print job again. If the message does not

appear, it was a false indication and no further attention is required.

2. If the message reappears, press the CLEAR key. If the message goes

away, it was a false indication and no further attention is required. If the

message reappears, call your Hewlett-Packard Customer Service

Engineer.

Table 21 explains the fault messages and offers solutions where possible.

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 303 304

No comments

HP LQH-HW 3ULQWHUV User Manual Page 259