HP LQH-HW 3ULQWHUV User Manual Page 151

  • Download
  • Add to my manuals
  • Print
  • Page
    / 304
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 150
Communicating Across Routers
151
Communicating Across Routers
Since Windows environments rely on TCP/IP to communicate with the LineJet
Print Server, crossing routers becomes an issue.
After following one of the LineJet Print Server configuration methods
mentioned, you should be able to communicate only with the print server from
the same subnet. This means any hosts across a router will not see your
LineJet Print Server. In order for hosts across a router to see your LineJet
Print Server, store a default router/gateway within the print server so that any
packets destined for another subnet get forwarded to this router
automatically. The router (or series of routers) can then take over ensuring
the packets get to their final destination on another subnet on your network.
To configure a default router/gateway within the LineJet Print Server:
1. Load a Web browser on your Windows station and direct it to the URL
http://
LineJetIPaddress
/networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
2. At the Network Configuration HTML form that displays, click in the first
field below the “Gateway” heading and type in the IP address of the
default router/gateway for the LineJet Print Server subnet.
3. Click on the SUBMIT button when done and physically repower the print
server to make the new settings take effect.
Changing Workgroup Names
Windows environments define groups of related computers as “workgroups.”
By default, the LineJet Print Server belongs to the workgroup called
WORKGROUP. However, you may want to change this to suit your network
better. To do this:
1. Load a Web browser on your Windows station and direct it to the URL
http://
LineJetIPaddress
/networkConf.html
(e.g.,
http://192.75.11.9/networkConf.html).
2. At the Network Configuration HTML form that displays, search for the
“Windows (NetBIOS TCP/IP)” section and highlight the “Workgroup
Name” field.
3. Type in the new workgroup name for the LineJet Print Server.
4. Click on the SUBMIT button when done and physically repower the print
server to make the new settings take effect.
Note
If prompted for a User ID and password first, type in
root for the ID and
press ENTER at the password prompt since there is no password by
default.
Note
If prompted for a User ID and password first, type in
root for the ID and
press ENTER at the password prompt since there is no password by
default.
Page view 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 303 304

Comments to this Manuals

No comments