Hp ProLiant DL585 Server User Manual download pdf (Page 165)

Troubleshooting

HP ProLiant DL585 Server User Guide H-7

Table H-3: Is the system power LED green?

Answer Possible reasons Possible solutions

No The Power on/Standby button has not

been pressed firmly.

Firmly press the power button.

A power supply problem exists. The

power supply might not be connected

or inserted properly, it might have a

damaged connector, or it might have

failed.

Be sure that the power supply is

undamaged, the power supply is fully

seated, and the power supply LED is

green.

The system might have experienced a

short.

Look for bent connector pins and

improperly seated expansion boards.

The front panel LED assembly has

failed.

Be sure that the front panel LED

assembly cable is connected to the

power backplane.

If these solutions do not solve the

problem, contact an authorized

service provider for assistance.

Yes If the system power button LED is

green, refer to Table H-4.

Note: For cabling configurations, refer to Appendix D, “Cabling guidelines.” For LED locations and

functions, refer to Appendix E, “System LEDs and switches.”

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 182 183

No comments

Hp ProLiant DL585 Server User Manual Page 165