Hp ProLiant DL585 Server User Manual download pdf (Page 107)

Server Configuration and Utilities

5-10 HP ProLiant DL585 Server User Guide

Enhanced auto-configuration process

During the power-up sequence that occurs the first time that the server is booted, the

system ROM automatically configures the entire system without any user

intervention.

By default setting, the system is configured for Microsoft Windows Server 2003. To

change any default settings in the auto-configuration process, load RBSU by pressing

the F9 key when prompted during POST. This action enables you to select the

language, operating system, and primary boot controller for the server. When these

settings are set according to your preference, exit RBSU and reboot the server.

The system then attempts to boot first from a bootable CD before booting from the

hard drive. For normal operating system installation, insert the operating system

installation CD into the CD-ROM drive. If the ProLiant Essentials Foundation Pack

supports an assisted installation for the operating system you are installing, insert the

ProLiant Essentials CD into the CD-ROM drive for an assisted installation.

If a POST error occurs, the system halts, pending a user selection from the menu. To

continue the boot process, press the F1 key, or select one of the other options on the

menu.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 182 183

No comments

Hp ProLiant DL585 Server User Manual Page 107