HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual download pdf (Page 90)

Reverse this procedure to install the speakers.

Fingerprint reader

Description Spare part number

Fingerprint reader (includes cable) 737730-001

Before removing the fingerprint reader, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 45)

5. Remove the service cover (see Service cover on page 47).

6. Remove the optical drive (see Optical drive on page 56) or upgrade bay hard drive (see Upgrade Bay

hard drive on page 58).

7. Remove the keyboard (see Keyboard on page 61).

8. Remove the top cover (see Top cover on page 71).

Remove the fingerprint reader:

1. Turn the top cover upside down with the front toward you.

2. Remove the Phillips PM2.0×3.0 screw (1) that secures the fingerprint reader to the top cover.

3. Remove the fingerprint reader bracket (2).

The fingerprint reader bracket is available in the Bracket Kit using spare part number 733637-001.

4. Detach the fingerprint reader cable (3) from the top cover. (The fingerprint reader cable is attached to

the top cover with double-sided tape.)

78 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 163 164

No comments

HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual Page 90