HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual download pdf (Page 53)

4 Removal and replacement procedures

preliminary requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

●

Flat-bladed screwdriver

●

Magnetic screwdriver

●

Phillips P0 and P1 screwdrivers

●

Torx T8 screwdriver

●

5.0 mm hex socket driver

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly

and assembly procedures.

NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying

screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling

the plastic parts. Apply pressure only at the points designated in the maintenance instructions.

Cables and and pointing stick connectors

CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the

reassembly process. Improper cable placement can damage the computer.

Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or

seat the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases,

avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be

caught or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables

tear easily.

Tools required 41

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 163 164

No comments

HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual Page 53