HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual Page 123
- Page / 164
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Setting a MultiBoot Express prompt
To start Computer Setup and set the computer to display the MultiBoot startup location menu each time the
computer is started or restarted, follow these steps:
1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2. Press f10 to enter Computer Setup.
3. Use a pointing device or the arrow keys to select System Configuration > Boot Options, and then press
enter.
4. In the MultiBoot Express Popup Delay (Sec) field, enter the length of time in seconds that you want the
computer to display the startup location menu before it defaults to the current MultiBoot setting.
(When 0 is selected, the Express Boot startup location menu is not displayed.)
5. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the
screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Entering MultiBoot Express preferences
When the Express Boot menu is displayed during startup, you have the following choices:
●
To specify a boot device from the Express Boot menu, select your preference within the allotted time,
and then press enter.
●
To prevent the computer from defaulting to the current MultiBoot setting, press any key before the
allotted time expires. The computer will not start until you select a boot device and press enter.
●
To allow the computer to start according to the current MultiBoot settings, wait for the allotted time to
expire.
Using System Diagnostics
System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is functioning
properly. The following diagnostic tests may be available in System Diagnostics:
●
System Tune-Up—This group of additional tests checks your computer to make sure that the main
components are functioning correctly. System Tune-Up runs longer and more comprehensive tests on
memory modules, hard drive SMART attributes, the hard drive surface, the battery (and battery
calibration), video memory, and the WLAN module status.
●
Start-up test—This test analyzes the main computer components that are required to start the
computer.
●
Run-in test—This test repeats the start-up test and checks for intermittent problems that the start-up
test does not detect.
●
Hard disk test—This test analyzes the physical condition of the hard drive, and then checks all data in
every sector of the hard drive. If the test detects a damaged sector, it attempts to move the data to a
good sector.
●
Memory test—This test analyzes the physical condition of the memory modules. If it reports an error,
replace the memory modules immediately.
Using System Diagnostics 111
- Maintenance and Service Guide 1
- Safety warning notice 5
- Table of contents 7
- 1 Product description 13
- Display 7 19
- Buttons and speakers 20
- Buttons and speakers 9 21
- Lights 11 23
- TouchPad 24
- Front 13 25
- Right 15 27
- Bottom 17 29
- 3 Illustrated parts catalog 31
- PCID label 32
- Non-Windows 8 models 33
- Computer major components 34
- Computer major components 23 35
- Computer major components 25 37
- Display assembly components 39
- Bracket Kit 41
- Cable Kit 42
- Plastics Kit 43
- Mass storage devices 44
- Miscellaneous parts 45
- Tools required 53
- Service considerations 53
- Grounding guidelines 54
- Workstation guidelines 55
- Equipment guidelines 56
- Customer Self-Repair parts 57
- SIM card 58
- Service cover 59
- Solid-state drive 62
- WLAN module 63
- WWAN module 65
- RTC battery 67
- Optical drive 68
- Upgrade Bay hard drive 70
- Expansion memory module 72
- Keyboard 73
- Primary memory module 76
- Display bezel 78
- Display panel 80
- Webcam/microphone module 82
- Top cover 83
- Multifunction board 87
- Speakers 89
- Fingerprint reader 90
- Power button board 91
- Display assembly 93
- ExpressCard assembly 99
- Smart Card reader 100
- Audio/USB board 101
- Processor heat sink 103
- 2. Remove the heat sink (2) 104
- Processor 106
- Graphics subsystem heat sink 108
- Graphics board 111
- Power connector cable 113
- System board 114
- Using Computer Setup 118
- Updating the BIOS 119
- Using MultiBoot 121
- Using System Diagnostics 123
- Determining the BIOS version 127
- Downloading a BIOS update 127
- Starting Computer Setup 132
- 10 Specifications 137
- Backing up your information 138
- Performing a system recovery 139
- Using HP Software Setup 142
- Guidelines 143
- Creating backups 149
- Creating restore media 149
- Nonvolatile memory usage 153
- Questions and answers 155
- 16 Recycling 160
Related products and manuals for Laptops HP ZBook 17 G2 Mobile Workstation (ENERGY STAR)
Laptops HP DV3 Technical Information
(116 pages)
(116 pages)
Laptops HP Compaq tc4400 Tablet PC User Manual
(228 pages)
(228 pages)
Laptops HP Chromebook 14 G4 User Manual
(24 pages)
(24 pages)
Laptops HP OMEN - 17-w200 CTO User Manual
(104 pages)
(104 pages)
Laptops HP Chromebook 14-q032ef User Manual
(70 pages)
(70 pages)
© 2020, manymanuals.com. All rights reserved. | 0.197 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals