HP D5400 User Manual download pdf (Page 141)

If the memory card is not inserted properly, the product will not respond and the green

Photo light (near the memory card slots) will blink rapidly.

After the memory card has been inserted properly, the Photo light will blink green for

a few seconds, and then remain lit.

Cause: The card was inserted backwards or upside down.

Card is damaged

Solution: Reformat your memory card in your camera or format your memory card

in a Windows XP computer by selecting the FAT format. For more information, see

the documentation that came with your digital camera.

CAUTION: Reformatting the memory card will delete any photos stored on the

card. If you have previously transferred the photos from your memory card to a

computer, try printing the photos from the computer. Otherwise, you will need to

retake any photos you might have lost.

Cause: You formatted the card on a Windows XP computer. By default, Windows

XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32

format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and

cannot recognize a FAT32 formatted card.

Card is not fully inserted

Solution: Make sure you fully insert the memory card into the appropriate slot on

the product.

If the memory card is not inserted properly, the product will not respond and the green

Photo light (near the memory card slots) will blink rapidly.

After the memory card has been inserted properly, the Photo light will blink green for

a few seconds, and then remain lit.

Cause: The card was not fully inserted.

CD/DVD is upside down

Solution: Make sure the CD/DVD is snapped onto the CD/DVD holder with the

printable label side up.

Cause: The CD/DVD was loaded upside down on the CD/DVD holder.

Chapter 11

140 Troubleshooting

Troubleshooting

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 220 221

No comments

HP D5400 User Manual Page 141