HP 620n User's Guide download pdf (Page 200)

ENWW Troubleshooting the HP Jetdirect Print Server 200

Troubleshooting an LPD UNIX

Configuration

Note For HP Jetdirect wireless print servers, this section

assumes that a wireless connection to your network

has been established.

The troubleshooting steps below describe how to troubleshoot

printing problems you may have with the HP Jetdirect print server.

1. Print a Jetdirect configuration page.

2. Verify that the IP configuration values are correct. If they are

not, reconfigure the HP Jetdirect print server.

3. Log onto the host system and type:

ping <IP address>

where <IP address> is the IP Address assigned to the printer.

4. If ping fails, make sure the IP Address on the configuration page

is correct. If it is correct, the problem is in the network.

5. If the ping test passes, print a test file. At the UNIX prompt,

type:

lpr -Pprinter_name test_file (BSD-based and Linux

systems)

where printer_name is the name of your printer and

test_file is an appropriate file (ASCII, PCL, PostScript,

HP-GL/2, or text) for the printer defined in the :rp tag in the

printcap file.

6. If the test file does not print, do the following:

■ Check printcap entries.

■ Check printer status (using LPC or a similar process).

■ Examine the contents of the logfile for this printer, such as

/usr/spool/lpd/error_log_filename

■ Check other log files, such as

HP-UX: /usr/adm/syslog

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 263 264

No comments

HP 620n User's Guide Page 200