HP 620n User's Guide download pdf (Page 44)

ENWW TCP/IP Configuration 44

sm 1 The subnet mask tag. The subnet mask will be used by

the HP Jetdirect print server to identify the portions of an

IP address that specify the network/subnetwork number

and the host address.

gw 3 The gateway IP address tag. This address identifies the

IP address of the default gateway (router) that the

HP Jetdirect print server will use for communications

with other subnets.

ds 6 DNS (Domain Name System) server’s IP address tag.

Only a single name server can be specified.

lg 7 The syslog server’s IP address tag. It specifies the server

that the HP Jetdirect print server sends syslog messages

to. For more information, see Appendix A

hn 12 The host name tag. This tag does not take a value but

causes the BOOTP daemon to download the host name

to the HP Jetdirect print server. The host name will be

printed on the Jetdirect configuration page, or returned on

an SNMP sysName request by a network application.

dn 15 Domain name tag. Specifies the domain name for the

HP Jetdirect print server (for example, support.hp.com). It

does not include the host name; it is not the Fully Qualified

Domain Name (such as printer1.support.hp.com).

ef 18 Extensions file tag that specifies the relative path name of

the TFTP configuration file.

Note: This tag is similar to the vendor-specific tag T144,

described below.

na 44 Tag for IP addresses of the NetBIOS-over-TCP/IP Name

Server (NBNS). A primary and secondary server may be

specified in order of preference.

lease-time 51 DHCP IP address lease duration time (seconds).

tr 58 DHCP T1 timeout, specifying the DHCP lease renewal

time (seconds).

Table 3.1 Tags Supported in a BOOTP/DHCP Boot file (2 of 4)

Item RFC

2132

Option

Description

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 263 264

No comments

HP 620n User's Guide Page 44