HP 620n User's Guide download pdf (Page 67)

ENWW TCP/IP Configuration 67

6. Enter the range of IP addresses for this scope (beginning IP

address and ending IP address). Also, enter the subnet mask.

then click Next.

Note If subnetting is used, the subnet mask defines

which portion of an IP address specifies the subnet

and which portion specifies the client device. For

more information, see Appendix A

7. If applicable, enter the range of IP addresses within the scope

to be excluded by the server. Then click Next.

8. Set the IP address lease duration for your DHCP clients. Then

click Next.

HP recommends that all printers be assigned reserved IP

addresses. This can be accomplished after you set up the scope

(see step 11

9. Select No to configure DHCP options for this scope later. Then

click Next.

To configure DHCP options now, select Yes and click Next.

a. If desired, specify the IP address of the router (or default

gateway) to be used by clients. Then click Next.

b. If desired, specify the Domain Name and DNS (Domain

Name System) servers for clients. Click Next.

c. If desired, specify WINS server names and IP addresses.

Click Next.

d. Select Yes to activate the DHCP options now, and click

Next.

10. You have successfully set up the DHCP scope on this server.

Click Finish to close the wizard.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 263 264

No comments

HP 620n User's Guide Page 67