HP 640n User's Guide

HP Jetdirect Print ServersAdministrator’s GuideJ8025A (640n)J8024A (695n)HP Jetdirect Firmware V.45

Verify the configuration ... 172Print from Microsoft Windows clients .

print jobs sent to the printer either from the server or from a client computer that has set up thatprinter, includes a reset command at the beginning

Table 4-15 Wizard Security LevelsSecurity Level DescriptionBasic Security Requires that you configure an administrator password for configuration man

Table 4-15 Wizard Security Levels (continued)Security Level DescriptionEnhanced Security(Recommended)Adds to Basic Security by automatically disablin

Only the configuration settings listed are restored to factory defaults. Other configuration settings arenot affected.AuthorizationUse the Authorizati

NOTE: While self-signed certificates are permitted and allow data encryption, they do not ensurevalid authentication. A self-signed certificate is sim

Table 4-16 Certificate configuration screens (continued)●Update Pre-Installed Certificate Update the pre-installed, self-signed certificate. The cert

Table 4-16 Certificate configuration screens (continued) ●Displays only when a self-signed certificate is pre-installed and you click Edit Settings t

Table 4-16 Certificate configuration screens (continued)●Import an HP Jetdirect certificate and private key. When imported, the existing certificate

To clear the entire access control list, clear all Save check boxes, and then click Apply.Mgmt. ProtocolsUse this item to access the management commun

CAUTION: Creating SNMP v3 accounts with the HP Embedded Web Server removes existingaccounts. Also, you must implement the account information on the S

1 Introducing the HP Jetdirect printserverHP Jetdirect print servers connect printers and other devices directly to a network. By attaching adevice di

Table 4-17 Other protocols (continued)Item DescriptionEnable Device Discovery Select device discovery protocols supported by the print server:SLPIf e

The supported 802.1X authentication protocols and associated configuration depend on the printserver model and firmware version. Available configurati

Table 4-18 802.1X configuration settings (continued)Item DescriptionAuthentication Behavior:Reauthenticate on ApplyControl authentication when you cl

Network StatisticsSelect the General tab to display counter values and other status information currently stored on theHP Jetdirect print server. This

104 Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx) ENWW

5 IPsec/Firewall configuration (V.45.xx.nn.xx)(Full-featured print servers only) IPsec/Firewall features provide network-layer security on both IPv4an

Figure 5-1 Firewall Policy pageFigure 5-2 IPsec Policy pageThe items on the IPsec/Firewall policy pages are described in the following table:106 Cha

Table 5-1 IPsec/Firewall Policy pageItem DescriptionEnable IPsec/FirewallorEnable FirewallSelect the check box to enable your IPsec or Firewall polic

Default Rule exampleThe following illustrates the print server behavior depending on whether the default rule is set toAllow or Drop (default).IPsec P

Enter up to ten rules, each rule specifying the host addresses, services, and the action to take forthose addresses and services. Depending on whether

To view the HP Jetdirect print server product number and installed firmware version, use theHP Jetdirect configuration page (see HP Jetdirect configur

Table 5-2 Limitations to rules, templates and services (continued)Item Limit◦ FE81:: to FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF for local addresses,:

Table 5-3 Create Address Template pageItem DescriptionAddress Template Name Name of the custom address template. The name is added to the Specify Add

Manage ServicesItems on the Manage Services page are described in the following table.1. Select one or more services for your service template. To sel

Table 5-6 Manage Custom Services page (continued)Item DescriptionService Port For TCP or UDP, select the ports for this custom service to use on the

Create IPsec TemplateUse this page to create an IPsec template and to specify how security associations (SAs) are created(manually or dynamically). To

Table 5-8 Identity Authentication pageItem DescriptionPre-Shared Key Select the Identity Type. Choose from Distinguished Name, FQDN, E-mail, Key-ID,

Table 5-9 Kerberos pageItem DescriptionManually Specify Configuration Manually configure the print server for Kerberos authentication. Click Next to

Table 5-10 Kerberos Settings page (continued)Item DescriptionClock Skew Clock skew is a measure of allowed differences between clocks during transact

Table 5-12 IKEv1/IKEv2 Phase 2 / Quick Mode Settings (IPsec Protocols) pageItem DescriptionEncapsulation Type Specify how the selected IPsec protocol

NOTE: You cannot use IPv4 address ranges with manual keys. Instead, use a specific IP address.To use manual keys for key negotiation, use the followin

If HP network setup and management software for supported systems is not supplied, obtain it fromHP support at:www.hp.com/support/net_printingFor soft

Table 5-15 Manual Keys page (continued)Item DescriptionAH SPI (AH SPI fields are listed if AH is enabled on the IPsec Protocols page.) A 32-bit field

6 Security features (V.45.xx.nn.xx)The HP Jetdirect print server security features minimize unauthorized access to network parametersand other stored

Table 6-1 Summary of HP Jetdirect security features (continued)●Restrict access to HP Jetdirect configuration parameters by setting the administrator

Table 6-1 Summary of HP Jetdirect security features (continued)(For full-featured print servers only)● SNMP v3 agent on the HP Jetdirect print server

Limit access to security featuresYou can control access to HP Jetdirect configuration parameters using the available security features.Examples of var

7 Troubleshoot the HP Jetdirect printserverThis chapter describes how to diagnose and correct problems associated with the HP Jetdirect printserver.A

Reset to factory defaultsUse the following procedures to reset parameters on the HP Jetdirect print server to factory defaultvalues.CAUTION: A cold re

4. Press the down arrow M button (or 9 button) until Cold Reset appears.5.Press the Select  button (or 6 button) to perform a cold reset and then con

Disable an HP Jetdirect embedded print server (V.45.xx.nn.xx)NOTE: You can disable HP Jetdirect EIO and external print servers by disconnecting them f

General troubleshootingTroubleshooting chart - assess the problemFigure 7-1 Assessing the ProblemIs the PrinterOn and Online?Can you printa Configura

To configure the print server for EAP/802.1X authentication, use the HP Embedded Web Serverthrough your Web browser. For more information, see HP Embe

Procedure 1: Verify the printer is on and onlineTo verify that the printer is ready to print, check the following items:1. Is the printer plugged in a

If the configuration page does not print, check the following items:1. Did you perform the correct steps on the printer to print the configuration pag

A break in communications can result from a disruption in the network connection or the servergoing down. If your printer has an Auto Continue feature

Verify the configuration of the network's 802.1X port. If it does not allow guest or temporaryaccess, you might need to pre-configure the HP Jetd

11. Does the printer appear in HP Web Jetadmin or other management application?●Verify network and HP Jetdirect settings on the HP Jetdirect configura

Troubleshooting wireless print serversUnable to communicate during initial setupIf you use wireless communications to set up the print server, verify

My configured channel does not match the configuration page(Ad hoc mode only) The HP configuration tools allow you to select channel 10 or 11 (default

Improving reception and performanceWireless LAN radio signals can penetrate many indoor structures and can reflect around obstacles.However, wireless

138 Chapter 7 Troubleshoot the HP Jetdirect print server ENWW

8 HP Jetdirect configuration pagesThe configuration pages are important tools for managing or troubleshooting HP Jetdirect printservers.The standard c

HP supportHP online supportVisit the HP Web site 24 hours a day, 7 days a week at:www.hp.com/support/net_printingFirmware upgradesFull-featured HP Jet

HP Jetdirect configuration pageThe standard HP Jetdirect configuration page provides overall status and configuration settings onthe print server.Stat

Table 8-1 Configuration Page Sections (continued)Section Name Description802.11 Wireless Station Provides current status of the wireless connection,

Table 8-2 HP Jetdirect Configuration/General Information (continued)Message DescriptionSTATUS Current state of the HP Jetdirect print server.I/O CARD

Table 8-3 802.11 Wireless station settingsMessage DescriptionStatus Current state of the HP Jetdirect print server. See Table 8-2 HP JetdirectConfigu

Table 8-3 802.11 Wireless station settings (continued)Message DescriptionSSL Version Version of the installed SSL protocol.SSL Issuer Entity issuing

Table 8-4 Security Settings (continued)Message DescriptionIPsecorFirewallIf the print server and printer/MFP device supports IPsec, then IPsec appear

Table 8-4 Security Settings (continued)Message DescriptionAccess List (IPv4 only) Access control list is set on the HP Jetdirect print server. The li

TCP/IP protocol informationInformation in this section of the HP Jetdirect configuration page is described in the following table.For general TCP/IP c

Table 8-7 IPv4 SectionMessage DescriptionSTATUS Current TCP/IPv4 status.READY Print server is awaiting data over TCP/IP.DISABLED TCP/IP is manually d

Table 8-7 IPv4 Section (continued)Message DescriptionBOOTP SERVERorDHCP SERVERorRARP SERVERDisplayed if BOOTP, DHCP, or RARP is used for TCP/IP confi

NOTE: For toll-free support in the USA and Canada, call 1-800-HPINVENT or 1-800-474-6836.Telephone fees are the responsibility of the caller. Rates ca

Table 8-8 IPv6 Section (continued)Message DescriptionDHCPV6 IPv6 stateful address configured by a DHCPv6 server.Not Configured Address is not set.MAN

Novell/NetWare parametersInformation in this section of the HP Jetdirect configuration page is described in Table 8-10 Novell/NetWare configuration in

Table 8-11 AppleTalk configuration informationMessage DescriptionSTATUS Current AppleTalk configuration status.READY Print server is awaiting data.DI

Table 8-13 Error messagesError Code and Message Description02 LAN ERROR - INTERNALLOOPBACKDuring self-test, an internal loopback test error was detec

Table 8-13 Error messages (continued)Error Code and Message Description11 LAN ERROR - RETRY FAULTS (Ethernet) There is a problem with your network ca

Table 8-13 Error messages (continued)Error Code and Message Description1E FAIL RESERVING PRINTERNUMThe SPX connection to the print server was lost wh

Table 8-13 Error messages (continued)Error Code and Message Description28 OUT OF BUFFERS The HP Jetdirect print server cannot allocate a buffer from

Table 8-13 Error messages (continued)Error Code and Message Description3C NDS ERR: UNRESOLVEDQUEUECannot locate the print queue object in the specifi

Table 8-13 Error messages (continued)Error Code and Message Description51 TFTP RETRIES EXCEEDED Retry limit exceeded when transferring the TFTP confi

Table 8-13 Error messages (continued)Error Code and Message Description84 DHCP LEASE TIMERSADJUSTEDThe print server detected a DHCP lease error due t

2 HP software solutions summaryHP provides a variety of software solutions to set up or manage your HP Jetdirect-connected networkdevices. To determin

Figure 8-2 HP Jetdirect Security PageThe parameters in each section of the Security page are described in the following table.Security settingsThis s

Table 8-14 General Information (continued)Message DescriptionIPsec Current IPsec status.Enabled Enabled and operating as configured.Disabled Turned o

Table 8-14 General Information (continued)Message DescriptionSNMP Get Cmty Name SNMP get community name is configured on the HP Jetdirect print serve

Table 8-16 IPsec statisticsMessage DescriptionFragmentation Errors Number of fragmented packets that cannot be reassembled.ESP MAC Errors Number of e

For each rule configured, the names of the IP address template, service template, and IPsec templatethat define the rule are displayed. For more infor

A LPD printingThe HP Jetdirect print server contains an LPD server module to support LPD printing. This chapterdescribes how to configure the HP Jetdi

About LPDLine printer daemon (LPD) refers to the protocol and programs associated with line-printer spoolingservices that are typically installed on v

HARDWARE ADDRESS: xxxxxxxxxxxxIn this examle, x is a hexadecimal digit (for example, 0001E6123ABC).●IP address configured on the HP Jetdirect print se

LPD on UNIX systemsConfigure print queues for BSD-based systemsEdit the /etc/printcap file to include the following entries:printer_name|short_printer

mkdir /usr/spool/lpdcd /usr/spool/lpdmkdir printer_name_1 printer_name_2chown daemon printer_name_1 printer_name_2chgrp daemon printer_name_1 printer_

Table 2-1 Software Solutions (continued)Operating Environment Function Remarks(See the HP Website for supportedsystem updates.)Microsoft Windows XP P

Type the name of a user-defined queue to include predefined strings before and/or after the printdata (set up user-defined queues using Telnet or the

Install TCP/IP softwareUse this procedure to verify whether you have TCP/IP installed on a supported Microsoft Windowssystem and to install the softwa

d. Click Details, and verify that Print Services for Unix is enabled.e. Click OK, and then Next.2. Open the Printers and Faxes folder (click Start, Pr

In the example, <ipaddress> is the IP address of the print server, <queuename> is raw or textand filename is the file to print. If the fil

5. In the Add LPR Compatible Printer window, do the following:a. Type the DNS name or IP address of the HP Jetdirect print server.NOTE: Some client ap

B FTP printingFTP is a basic TCP/IP utility for transferring data between systems. FTP printing sends print files froma client system to an HP Jetdire

server supports up to four simultaneous control connections (or FTP sessions). If the number isexceeded, a service not available message is displayed.

If login is successful, a message 230 is displayed on the client system. In addition, the availableHP Jetdirect printing ports are displayed. Supporte

Example FTP SessionThis is an example of a typical FTP printing session:Figure B-2 FTP Session ExampleC:\> ftp 192.168.45.39Connected to 192.168.4

C HP Jetdirect control panel menus (V.45.xx.nn.xx)The configuration menu for the HP Jetdirect EIO and embedded print servers is accessed from theprint

HP Jetdirect Printer Installer for UNIXThe HP Jetdirect Printer Installer for UNIX supports HP-UX and Solaris systems. The softwareinstalls, configure

Graphical control panel menusNewer printer/MFP devices support graphical control panels, which can consist of a numeric keypad,navigation buttons, and

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)Menu item Sub-menu item Sub-menu item Values and Description Configure Keys Tr

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)Menu item Sub-menu item Sub-menu item Values and Description DHCP Renew Displ

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)Menu item Sub-menu item Sub-menu item Values and Description DHCPv6 Policy Rou

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)Menu item Sub-menu item Sub-menu item Values and DescriptionAppleTalk Enable

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)Menu item Sub-menu item Sub-menu item Values and Description Code Verification

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)Menu item Sub-menu item Sub-menu item Values and Description SNMP Test Checks

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)Menu item Sub-menu item Sub-menu item Values and Description Execute Run the p

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)Menu item Sub-menu item Sub-menu item Values and DescriptionLink Speed Set

Classic control panel EIO menusClassic control panels are provided on older devices that support HP Jetdirect EIO print servers only.Classic control p

Install HP Web Jetadmin softwareTo install HP Web Jetadmin software, use the following steps:1. Verify that you have administrator privileges on the l

Table C-2 HP Jetdirect EIO Menu on Classic Control Panel (continued)Menu Item DescriptionIf you specify BOOTP=NO*, DHCP=NO* and AUTO IP=NO*, you can

Table C-2 HP Jetdirect EIO Menu on Classic Control Panel (continued)Menu Item DescriptionSECURITY Reset current security settings to factory defaults

192 Appendix C HP Jetdirect control panel menus (V.45.xx.nn.xx) ENWW

D Open source licensing statementsThe HP products discussed in this guide include open source software developed by the following:●gSOAP●Expat XML Par

Expat XML ParserThis product contains Expat in object form. Use of this software is governed by the terms of thelicense below:Copyright (c) 1998, 1999

cURLThis product contains cURL in object form. Use of this software is governed by the terms of thelicense below:COPYRIGHT AND PERMISSION NOTICECopyri

GNU General Public LicenseThis product includes software licensed under the GNU General Public License (LGPL) version 2.0.Source code for the open sou

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION0. This License applies to any program or other work which contains a notice placed by

In addition, mere aggregation of another work not based on the Program with the Program (orwith a work based on the Program) on a volume of a storage

from the conditions of this License. If you cannot distribute so as to satisfy simultaneously yourobligations under this License and any other pertine

The following features and benefits are provided by Internet printing:●Print high-quality, time-sensitive documents remotely, in full color or black-a

YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALLNECESSARY SERVICING, REPAIR OR CORRECTION.12. MODIFY AND/OR REDISTRIBUTE THE PROGRA

GNU Lesser General Public LicenseThis product includes software licensed under the GNU Lesser General Public License (LGPL)version 2.1. Source code fo

restrictive license from a patent holder. Therefore, we insist that any patent license obtained for aversion of the library must be consistent with th

"Source code" for a work means the preferred form of the work for making modifications to it. Fora library, complete source code means all t

3. You may opt to apply the terms of the ordinary GNU General Public License instead of thisLicense to a given copy of the Library. To do this, you mu

the work during execution displays copyright notices, you must include the copyright notice forthe Library among them, as well as a reference directin

However, parties who have received copies, or rights, from you under this License will not havetheir licenses terminated so long as such parties remai

14. If you wish to incorporate parts of the Library into other free programs whose distributionconditions are incompatible with these, write to the au

OpenSSLOpenSSL licenseThis product contains OpenSSL in binary form. Use of this software is governed by the terms of thelicense below:Copyright © 1998

This library is free for commercial and non-commercial use as long as the following conditions areadheared to. The following conditions apply to all c

Novell-supplied softwareThe HP Jetdirect print server is compatible with IPP running on NetWare 5.1 with SP1 or later. ForNetWare client support, see

210 Appendix D Open source licensing statements ENWW

IndexAAccess ListConfiguration page entry 146embedded Web server 97Security features 122Telnet configuration 50TFTP configuration file 30Ad Hoc Modeem

General messages 141IPX/SPX 150Novell NetWare 151Security page 160TCP/IP 147TCP/IPv4 147TCP/IPv6 149configuration page messages802.11 wireless 142Cont

HP Web Jetadmin 9Installing 10Recommended version 64Removing 10HTTPSConfiguration page 146, 162Control panel menu 190embedded Web server 65, 98Telnet

Novell NetWareConfiguration page 151embedded web server 66Error messages 152Status 151NOVRAM ERROR 157OOpen System authenticationTelnet 44OUT OF BUFFE

Subnet mask 148Bootptab file parameter 24TFTP host access list 30Supported network protocols 2Syslog parametersembedded Web server 81Telnet configurat

216 Index ENWW

©  Hewlett-Packard Development Company, L.P.www.hp.com

To add the printer to your system for printing, use the following steps:1. Open System Preferences, and then open Print & Fax.2. Click + to add a

14 Chapter 2 HP software solutions summary ENWW

3 TCP/IP configurationTo operate properly on a TCP/IP network, you must configure the HP Jetdirect print server with validTCP/IP network configuration

However, the use of two colons to represent successive zero fields can be used only once in anaddress.IPv6 addresses are often specified by a prefix t

Stateless addressesStateless addresses are usually assigned to the print server under router control, and not by a server,such as a DHCPv6 server. How

Tools and utilitiesSystem tools and utilities for IPv6 networks are available to access or troubleshoot communicationswith the print server. The follo

management software. Manually assigned TCP/IP configuration values are retained when the printserver is turned off, and then turned on.You can configu

HP Jetdirect Print ServersAdministrator's Guide (Firmware V.45.xx.nn)

To determine the IP address configured on your print server, use the HP Jetdirect configuration page.See HP Jetdirect configuration pages on page 139.

Default IPv4 behaviorWhen turned on, a factory-default print server connected to a network through a cable (wired),retrieves its IPv4 settings by syst

limited subset of the configuration parameters, control panel configuration is recommended onlyduring troubleshooting or for simple installations. If

Systems using network information service (NIS)If your system uses NIS, you might need to rebuild the NIS map with the BOOTP service beforeperforming

Entries and tags supported by the HP Jetdirect print server are listed in the following table:Table 3-1 Tags supported in a BOOTP/DHCP boot fileItem

Table 3-1 Tags supported in a BOOTP/DHCP boot file (continued)Item RFC 2132OptionDescriptionT146-- Buffer packing. HP proprietary. Set buffer packing

Example HP Jetdirect TFTP configuration file# Allow subnet 192.168.10.0 accessallow: 192.168.10.0255.255.255.0## Disable Telnettelnet-config: 0##

Table 3-2 TFTP configuration file parameters (continued)ssl-state: (or ssl-redirect-config)Print server's security level for Web communicat

Table 3-2 TFTP configuration file parameters (continued)subnet-mask:Identify the network and host portions of an IPv4 address in received messages. F

Table 3-2 TFTP configuration file parameters (continued)ftp-printing: (or ftp-config:, ftp:) Print through FTP. 0: Disable. 1 (default): Enable.

© 2014 Copyright Hewlett-PackardDevelopment Company, L.P.Reproduction, adaptation, or translationwithout prior written permission isprohibited, except

Table 3-2 TFTP configuration file parameters (continued)mult-tcp-conn:Allow multiple TCP connections.0 (default): Enable multiple connections.1: Disa

Table 3-2 TFTP configuration file parameters (continued)slp-keep-alive:Number of minutes the print server waits between sending multicast packets on

Table 3-2 TFTP configuration file parameters (continued)hoplimit-wsdSet the WS-Discovery hop limit for the site local IPv6 multicast packet.ipv4-mult

Table 3-2 TFTP configuration file parameters (continued)default-ip:IP address to use when the print server is unable to obtain an IP address from the

Table 3-2 TFTP configuration file parameters (continued)trap-dest: (or trap-destination:) Add a host's IP address to the HP Jetdirect print

Table 3-2 TFTP configuration file parameters (continued)AppleTalkappletalk: (or at-config:, ethertalk:)Use AppleTalk (EtherTalk) protocol operat

Table 3-2 TFTP configuration file parameters (continued)◦HPGL2: Hewlett-Packard Graphics Language (v2).◦PS: PostScript language.network-select:(For H

On HP-UX systems, a sample DHCP configuration file (dhcptab) might be located in the /etcdirectory.If your HP-UX system does not provide DDNS services

The procedure enables the RARP daemon running on your system to respond to an RARP requestfrom the HP Jetdirect print server and to supply the IP addr

Using the arp and ping commands with HP Jetdirect print servers requires the following:●Microsoft Windows XP, Windows Server 2003, Windows Server 2008

Table of contents1 Introducing the HP Jetdirect print server ...

NOTE: Telnet use and support depends on the print server product and the printer/MFP device inwhich it is installed. Telnet might not be supported on

To set configuration parameters, you must set up a Telnet session from your system to theHP Jetdirect print server.1. At the system prompt, type the f

NOTE: To view supported commands, formats, and parameters, type ?.To list additional (or advanced) commands, type advanced before entering ?.To displa

Table 3-3 Telnet Commands and Parameters (continued)passwd Password that allows administrators to control changes of HP Jetdirect print serverconfigu

Table 3-3 Telnet Commands and Parameters (continued)AMPDU AggregationAggregating 802.11n MAC protocol data units packs them into frames to reduceover

Table 3-3 Telnet Commands and Parameters (continued)psk-passphrasePassphrase used to generate a network pre-shared key. A passphrase must be from 8to

Table 3-3 Telnet Commands and Parameters (continued)roam-thresholdSpecify the wireless signal strength level where the print server seeks an access p

Table 3-3 Telnet Commands and Parameters (continued)ipsec-configfirewall-configNOTE: The ipsec-config command is available on print servers that supp

Table 3-3 Telnet Commands and Parameters (continued)domain-name Domain name for the device. For example:domain-name support.hp.comIn the example, sup

Table 3-3 Telnet Commands and Parameters (continued)interlockRequire an acknowledgement (ACK) on all TCP packets before the printer can close aport 9

Mac OS network installation ... 123 TCP/I

Table 3-3 Telnet Commands and Parameters (continued)allow Add an entry into the host access list stored on the HP Jetdirect print server. Each entrys

Table 3-3 Telnet Commands and Parameters (continued)slp-keep-aliveTime (in minutes) the print server waits to send multicast packets on the network t

Table 3-3 Telnet Commands and Parameters (continued)bonjour-pri-svcHighest priority Bonjour service to use for printing. Set this parameter using the

Table 3-3 Telnet Commands and Parameters (continued)cold-resetReset to TCP/IP factory default settings after a cold reset. (Parameters for othersubsy

Table 3-3 Telnet Commands and Parameters (continued)default-ip-dhcpPeriodically transmit DHCP requests when a legacy default IP address of 192.0.0.19

Table 3-3 Telnet Commands and Parameters (continued)set-cmnty-namePassword to determine which SNMP SetRequests (control functions) the HP Jetdirectpr

Table 3-3 Telnet Commands and Parameters (continued)ipx-sapintervalTime in seconds that the HP Jetdirect print server waits between service advertisi

Table 3-3 Telnet Commands and Parameters (continued)Status(Read-only parameter.) Current AppleTalk configuration status.READY: HP Jetdirect print ser

Table 3-3 Telnet Commands and Parameters (continued)1000t-ms-confConfigure the print server as a master or slave device on a 1000T network.AUTO or 0

Table 3-3 Telnet Commands and Parameters (continued)status-page-langPrinter job language (PJL) that the print server uses to send the HP Jetdirectcon

View the HP Embedded Web Server ... 64Operating notes ..

Figure 3-1 Example: Using the Menu Interface Main Menu-------------------------------1. General Menu2. TCP/IP Menu...3. SNMP Menu...4. IPX/S

NOTE: This procedure resets all TCP/IP parameters. Parameters for other subsystems such asIPX/SPX or AppleTalk are not affected.To reset all parameter

●Security settings●Link configuration settingsTo configure TCP/IP parameters not available from the control panel configuration, use an alternateconfi

4 HP Embedded Web Server (V.45.xx.nn.xx)HP Jetdirect print servers contain the HP Embedded Web Server, which is accessible from acompatible Web browse

RequirementsCompatible Web browsersTo access the HP Embedded Web Server, you must use a compatible Web browser. In general, youcan use those Web brows

server by inspecting the HP Jetdirect configuration page. See TCP/IP configuration on page 15 formore information.If the default IPv4 address 192.0.0.

Operating notes● If you enter or change a configuration parameter value, click Apply to enable your change, orclick Cancel to erase your change.●The H

Table 4-1 HP Jetdirect Home Page Items (continued)Item DescriptionHost Name IP host name assigned to the device and stored on the HP Jetdirect print

Table 4-2 Networking Menu ItemsCONFIGURATION section●Wireless Station on page 68●TCP/IP Settings on page 74●Network Settings on page 81●Other Setting

Table 4-3 Wireless Station configuration parametersItem DescriptionWireless Mode Select from 802.11b/g (the default) or 802.11b/g/n.Guard Interval Se

Network Statistics ... 103Protocol Info ...

Table 4-3 Wireless Station configuration parameters (continued)Item DescriptionNetwork Name (SSID) Select a network name that the HP Jetdirect print

Table 4-3 Wireless Station configuration parameters (continued)Item DescriptionWEP — Enterprise Select WEP — Enterprise security if your network uses

Table 4-3 Wireless Station configuration parameters (continued)Item DescriptionWPA (WiFi Protected Access) Your network uses WPA. Choose WPA–Personal

Table 4-3 Wireless Station configuration parameters (continued)Item DescriptionWPA–Enterprise Select WPA — Enterprise security if your network uses W

TCP/IP SettingsThe TCP/IP Settings menu provides access to the following tabs:●Summary tab on page 74●Network Identification tab on page 75●TCP/IP(v4)

Table 4-4 TCP/IP Summary tab (continued)Item DescriptionIPv6 Address list IPv6 addresses configured on the print server. For each address, the follow

Table 4-5 TCP/IP Network Identification tab (continued)Item DescriptionDNS Suffixes (IPv4/IPv6) Printer domain names. You can create and store a DNS

Table 4-6 TCP/IP(v4) tab (continued)Item DescriptionSubnet Mask Manually assign a subnet mask if subnetting is used. A subnet mask is a 32-bit number

Config Precedence tabSpecify the order of precedence of the print server configuration methods. For example, to ensurethat IPv4 parameters configured

BOOTP/DHCPv4DHCPv6TFTPManualDefault3. Press Clear Previous Values and Reinitialize Now.Advanced tabUse this tab to configure additional TCP/IP paramet

8 HP Jetdirect configuration pages ... 139

Table 4-9 TCP/IP Advanced tab (continued)Item DescriptionProxy Server Port (For printers/MFPs that support this feature)(IPv4 only) Port number used

Table 4-9 TCP/IP Advanced tab (continued)Item DescriptionSyslog Server (IPv4 only) IP address of a host computer that is configured to receive syslog

Table 4-10 IPX/SPX tab settings (continued)Item DescriptionIPX/SPX Frame Type IPX/SPX frame type to use on your network. After a frame type is config

NOTE: The displayed AppleTalk parameters include the printer types that are advertised on thenetwork.The HP Jetdirect print server supports AppleTalk

Table 4-12 SNMP tab settingsItem DescriptionEnable SNMPv1/v2 read-write accessSelect the check box to enable the SNMP v1/v2c agents on the print serv

Other SettingsUse this tab to provide access to a variety of management and printing configuration options. Thefollowing tabs are discussed:●Misc. Set

Table 4-13 Miscellaneous Settings (continued)Item DescriptionCertificate Mgmt Service Allow HP Web Jetadmin to access and service your certificate co

Table 4-13 Miscellaneous Settings (continued)Item DescriptionBonjour Highest PriorityServiceSpecify the highest Bonjour priority service to use for p

If LPD printing is enabled, ten different named print queues are available. Four of these queues areconfigured automatically and their parameters cann

Table 4-14 LPD Queues tab settings (continued)Item DescriptionQueue Type Processing instruction for the queue. Choose from these four queue types:●RA