HP 620n User's Guide download pdf (Page 60)

ENWW TCP/IP Configuration 60

usb-mode:

Specifies the communication mode over the USB port on the HP Jetdirect print

server.

● Auto (default): Automatically negotiates and sets the highest

communication mode possible for the attached printer or device.

● MLC: (Multiple Logical Channels) An HP-proprietary communication mode that

allows multiple channels of simultaneous print, scan and status

communications.

● BIDIR: A standard connection that supports bi-directional communications

between the printer and print server. The print server sends print data and

receives status from the printer.

● UNIDIR: A standard connection in which data is transferred in one direction

only (to the printer).

status-page-lang:

Specifies the page description language (PDL) that the print server will use to send

the Jetdirect configuration/status page to the printer.

● Auto (default): The PDL is auto-detected when the print server is powered on

or after a cold-reset.

● PCL: Hewlett-Packard Printer Control Language

● ASCII: Standard ascii characters

● HPGL2: Hewlett-Packard Graphics Language (v2)

● PS: Postscript language

network-select:

(For HP Jetdirect products with a dual wired/wireless port, such as model ew2400)

Specifies the active behavior of the print server.

● Auto (default): Automatically detects whether a network cable is attached. If a

network cable is not attached, only the IEEE 802.11g wireless port will be

active. However, if a network cable is attached, then only the IEEE 802.3 wired

port will be active. Use caution when plugging in a network cable on an

active wireless network. Wireless access to the device will be terminated.

● Wired: Only the 802.3 wired port will be active.

● Wireless: Only the 802.11g wireless port will be active.

Table 3.3 TFTP Configuration File Parameters (11 of 12)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 263 264

No comments

HP 620n User's Guide Page 60