HP 620n User's Guide download pdf (Page 114)

ENWW Using the Embedded Web Server 114

Static (WEP) Select Static (WEP) if your wireless network uses WEP (Wired

Equivalent Privacy) keys for basic access control and data

privacy. Under the control of your network administrator, each

wireless device on the network must be configured with the

same key.

Encrypt transmit data using: Select the current active key.

The HP Jetdirect print server can store up to four WEP keys using

four key positions (Key 1, 2, 3, 4). But there can be only a single

active key for a given network (or SSID) at a time. Key 1 is the

default active key.

Note: When you enter WEP keys, be sure to enter them in the

key positions (or fields) that match other wireless devices on

your network. For example, if other devices on your wireless

network are using a WEP key in the Key 2 position as the active

key, then you must also enter this WEP key in the Key 2 field

on the Jetdirect print server and select Key 2 as the active key.

The different key positions will have different encryption and

decryption results.

The HP Jetdirect wireless print server supports WEP keys for

40/64-bit and 104/128-bit encryption. To enter one or more WEP

keys:

Input keys in: Select whether you’ll use alphanumeric characters

or hexadecimal digits to specify WEP keys.

Select Alphanumeric to enter your WEP keys using

alphanumeric ASCII (8-bit) characters. Alphanumeric characters

are limited to 0 through 9, a through z, A through Z. (Note:

Alphanumeric characters are case-sensitive.Entering lower- or

uppercase characters, 'a - z' or 'A - Z', will result in different WEP

key values.)

Select Hexadecimal to enter hexadecimal (4-bit) digits.

Hexadecimal digits may be 0 through 9, a through f, A through F.

(Note: Hexadecimal digits are not case-sensitive.Entering lower-

or uppercase values, 'a - f' or 'A - F', will result in the same WEP

key value.)

All keys entered must be of the same length, either for 40/64-bit

or 104/128-bit encryption. In each Key field, enter your 5

alphanumeric characters or 10 hexadecimal digits (40 bits) for

“64-bit” encryption, or 13 alphanumeric characters or 26

hexadecimal digits (104 bits) for “128-bit” encryption. (Note: In

both cases, 24 "Initialization Vector" bits are automatically added.)

Table 4.3 802.11 Configuration Parameters (3 of 4)

Item Description

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 263 264

Comments to this Manuals

No comments

HP 620n User's Guide Page 114

Comments to this Manuals

Related products and manuals for Networking HP 620n