HP COMPAQ DX2710 MT Technical Information Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 107
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
2–10 483941-001 Service Reference Guide
Setup Utilities and Diagnostics Features
PnP/PCI
Configurations
(continued)
Resources Controlled By Allows you to select whether resources are
controlled automatically or manually:
Auto (ESCD–Extended Storage Configuration
Data)
•Manual
BIOS can automatically configure all the
bootable and Plug-and-Play-compatible
devices. If you choose Auto, you cannot
select IRQ, DMA and memory base address
fields since BIOS automatically assigns them.
IRQ Resources
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
When resources are controlled manually,
allows you to assign each system interrupt a
type, depending on the type of device using
the interrupt.
Legacy ISA for devices compliant with the
original PC AT bus specification, PCI/ISA
PnP for devices compliant with the Plug-and-
Play standard whether designed for PCI or
ISA bus architecture.
Hardware
Monitor Setup
CPU Fan Speed (view only)
System Fan Speed (view only)
CPU Fan Fault Detect Disables/enables detection of CPU failure
during POST.
SYS Fan Fault Detect Disables/enables detection of Fan failure
during POST.
Load Defaults
Setting
Allows you to reset Computer Setup to
factory defaults.
Set Supervisor
Password
Allows you to establish a password to control
access to Computer Setup.
Set User
Password
Allows you to establish a password to control
access to the computer.
Save Setting
and Exit
Allows you to save current settings and exit
Computer Setup.
Exit Without
Saving
Allows you to exit Computer Setup without
saving changes.
Computer Setup (Continued)
Heading Option Description
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 106 107

Comments to this Manuals

No comments