HP COMPAQ DX2710 MT Technical Information download pdf (Page 42)

6–6 483941-001 Service Reference Guide

Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis

6.3 Using the Small Form Factor Computer in a

Minitower Configuration

The Small Form Factor computer can be used in either a minitower or desktop configuration. To

use it in the minitower configuration, you must purchase a tower stand from HP (part number

316593-001).

CAUTION: If the computer is in the desktop configuration, ensure at least 4 inches (10.2 cm) of space

on all sides of the computer remains clear and free of obstructions.

To install the tower stand:

1. Rotate the computer into the tower position 1 and align the hole at the base of the computer

with the post and thumbscrew in the stand 2.

2. Tighten the screw to secure the computer to the stand 3 . This adds stability and helps to

ensure proper airflow to the internal components.

Installing the Tower Stand

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 106 107

No comments

HP COMPAQ DX2710 MT Technical Information Page 42