HP COMPAQ DX2710 MT Technical Information Page 23
- Page / 107
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3–4 483941-001 Service Reference Guide
Desktop Management
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the computer is turned on, press and hold the F10 key until you enter Computer
Setup. Press
Enter to bypass the title screen, if necessary.
✎
If you do not press the F10 key at the appropriate time, you must turn the computer off, then on
again, and press the
F10 key again to access the utility.
If you are using a PS/2 keyboard, you may see a Keyboard Error message—disregard it.
3. Select Set User Password and follow the instructions on the screen.
4. Before exiting, click Save and Exit Setup.
Entering a User Password
To enter a user password, complete the following steps:
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. When the key icon appears on the monitor, type your current password, then press Enter.
✎
Type carefully; for security reasons, the characters you type do not appear on the screen.
If you enter the password incorrectly, a broken key icon appears. Try again. After three
unsuccessful tries, you must turn off the computer, then turn it on again before you can continue.
Entering a Supervisor Password
If a supervisor password has been established on the computer, you will be prompted to enter it
each time you run Computer Setup.
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the computer is turned on, press and hold the F10 key until you enter Computer
Setup. Press
Enter to bypass the title screen, if necessary.
✎
If you do not press the F10 key at the appropriate time, you must turn the computer off, then on
again, and press the
F10 key again to access the utility.
If you are using a PS/2 keyboard, you may see a Keyboard Error message—disregard it.
3. When the key icon appears on the monitor, type the setup password, then press the Enter
key.
✎
Type carefully; for security reasons, the characters you type do not appear on the screen.
If you enter the password incorrectly, a broken key icon appears. Try again. After three
unsuccessful tries, you must turn off the computer, then turn it on again before you can continue.
Changing a User or Supervisor Password
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
To change the setup password, run Computer Setup.
2. To change the user password, go to step 3.
- Business PCs 1
- 1st Edition 1
- Service Reference Guide 2
- First Edition (February 2008) 3
- Contents 4
- A Connector Pin Assignments 6
- B Power Cord Set Requirements 6
- C POST Error Messages 6
- E Memory 6
- Redflag Linux 7
- 1.3 HP Software 8
- 2.1 Power-On Self-Test (POST) 9
- 2.2 Computer Setup Utilities 10
- 2.2.2 Computer Setup Menu 12
- Computer Setup (Continued) 13
- 2.3.1 Backing up the CMOS 19
- 2.3.2 Restoring the CMOS 19
- Desktop Management 20
- 3.2.2 Dual-State Power Button 21
- 3.2.3 Power Management 21
- 3.3 Security 22
- Entering a User Password 23
- Clearing Passwords 25
- 4.1 SATA 3.0 Hard Drives 26
- 4.2 SATA Hard Drive Cables 27
- 4.3 SATA SMART Drives 28
- 4.4 Drive Capacities 28
- 4.5 SATA BIOS 28
- Disassembly Preparation 29
- 5.2.1 Generating Static 31
- 5.2.4 Grounding the Work Area 32
- 5.3 Routine Care 33
- 5.3.3 Cleaning the Keyboard 34
- 5.3.4 Cleaning the Monitor 34
- 5.3.5 Cleaning the Mouse 34
- 5.4 Service Considerations 35
- 5.4.3 Cables and Connectors 36
- 5.4.4 Hard Drives 36
- MT chassis and SFF chassis) 38
- (SFF chassis) 40
- Removing the Front Bezel 41
- Minitower Configuration 42
- 6.4 Front Drive Bezels 43
- 6.5 Memory 44
- Installing a DIMM 46
- 6.6 Expansion Cards 47
- Installing an Expansion Card 50
- 6.7 Cable Management 52
- 6.8 Drives 53
- 6.8.2 Removing a Drive 54
- Removing the Hard disk 55
- Releasing the Hard Drive Cage 55
- Removing the Hard Drive Cage 56
- Removing the Hard Drive 57
- Desktop Drive Positions 57
- Installing the Optical Drive 60
- 6. Press the latch 1 63
- 6.10 System Fan 65
- 6.11 Heatsink - MT chassis 66
- 6.12 Processor 67
- 6.13 System Board 69
- 6.14 Battery 70
- 6.14.1 Battery Holder 71
- 6.15 Power Supply 72
- Connector Pin Assignments 73
- Parallel Interface 74
- Microphone 74
- Headphone 75
- Line-In Audio 75
- Line-Out Audio 75
- 24-Pin Power 76
- 4-Pin Power (for CPU) 76
- Power Cord Set Requirements 77
- POST Error Messages 78
- Preliminary Checklist 81
- Solving General Problems 82
- Solving Display Problems 87
- Solving Audio Problems 90
- Solving Printer Problems 92
- Solving Keyboard Problems 93
- Solving Network Problems 94
- Solving Memory Problems 96
- Solving Processor Problems 97
- Solving Drive Key Problems 99
- Restoring the Software 105
- Contacting Customer Support 106
Related products and manuals for Motherboards HP COMPAQ DX2710 MT
(66 pages)
(46 pages)© 2020, manymanuals.com. All rights reserved. | 0.551 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals