HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual download pdf (Page 70)

Upgrade Bay hard drive

NOTE: The Upgrade Bay hard drive must be installed in the Upgrade Bay hard drive carrier before it can be

installed in the computer. The Upgrade Bay hard drive carrier is available using spare part number

734298-001.

Before removing the Upgrade Bay hard drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 45).

5. Remove the service cover (see Service cover on page 47).

Remove the Upgrade Bay hard drive:

1. Position the computer with the front toward you.

2. Remove the four Phillips PM3.0×5.0 screws (1) that secure the Upgrade Bay hard drive carrier to the

computer.

3. Loosen the captive Phillips screw (2) that secures the Upgrade Bay hard drive carrier to the computer,

and then insert a flat-bladed screwdriver or similar tool into the Upgrade Bay hard drive tab access (3)

and press the tab to the left to release the Upgrade Bay hard drive carrier from the computer (4).

58 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 163 164

No comments

HP ZBook 17 G2 Mobile Workstation (ENERGY STAR) User Manual Page 70