HP J7949E User Manual download pdf (Page 81)

ENWW TCP/IP Configuration 81

dhcp-fqdn-config

dhcp-fqdn-behavior

Specifies configuration control of the Fully Qualified Domain

Name (FQDN), using either DHCP, manual configuration,

or both. The fully qualified domain name consists of the

device’s host name and domain name. Select one of the

following command values:

0 (default): DHCP may be used to supply the host name and

domain name. The host name may be changed using a

manual configuration method (such as the embedded Web

server, printer control panel, or Telnet). However, the

domain name cannot be manually changed if it was

configured through DHCP.

1: Keep DHCP settings only. Once the Fully Qualified

Domain Name is configured through DHCP, manual

changes cannot be made.

2: Keep manual settings. The settings can be manually

configured. DHCP may be used only if the settings are

factory-default values.

3: Keep manual settings only. While manual configuration

methods may be used, configuration through DHCP is not

allowed.

TCP/IP Diagnostics

Command Description

Last Config IP (Read-only parameter) The IP address of the system from

which the HP Jetdirect print server’s IP address was

configured.

TCP Conns Refused (Read-only parameter) The number of client TCP

connections that are refused by the print server.

TCP Access Denied (Read-only parameter) The number of times that client

systems were denied access to the print server because

there was no allowable entry in the print server’s host access

list.

DHCP Lease Time (Read-only parameter) DHCP IP address lease duration

time (seconds).

DHCP Renew Time (Read-only parameter) DHCP T1 timeout, specifying the

DHCP lease renewal time (seconds).

DHCP Rebind Time (Read-only parameter) DHCP T2 timeout, specifying the

DHCP lease rebind time (seconds).

Table 3.4 Telnet Commands and Parameters (9 of 13)

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 231 232

No comments

HP J7949E User Manual Page 81