HP J7949E User Manual download pdf (Page 6)

ENWW 6

Introducing the HP Jetdirect

Embedded Print Server

Introduction

This printer or multifunction peripheral (MFP) device contains an

HP Jetdirect embedded print server that is integrated directly on

the device. Using this print server, you can connect this device

directly to a network and share it among multiple users or systems.

Because the print server is built into the device, an input/output

(I/O) slot or external port is not needed for network connectivity and

may be used for other purposes.

Network Connection

Using the embedded print server and built-in RJ-45 connector, the

printer or MFP device can connect to an IEEE 802.3 10/100Base-TX

(Ethernet/Fast Ethernet) network through unshielded twisted-pair

network cables.

Autonegotiation (10/100Base-TX) is used to automatically configure

link operation at 10 Mbps or 100 Mbps, and full- or half-duplex

communication mode, as required by the network. However, link

operation may be manually set using several configuration tools,

such as the printer control panel (if supported), Telnet and TFTP

commands, a Web browser, and network management software.

These tools are described later in this guide.

Note Unless otherwise specified, the term print server in

this manual refers to an HP Jetdirect print server

and not a separate computer running print server

software.

1 2 3 4 5 6 7 8 9 10 11 ... 231 232

No comments

HP J7949E User Manual Page 6