HP J7949E User Manual Page 195

  • Download
  • Add to my manuals
  • Print
  • Page
    / 232
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 194
ENWW HP Jetdirect Configuration Page 195
Error Messages
Error codes and messages that may appear in the Status sections
of the Jetdirect configuration page are described in Table 9.9
.
Table 9.9 Error Messages (1 of 10)
Error Code and
Message
Description
02 LAN ERROR -
INTERNAL
LOOPBACK
During self-test, the HP Jetdirect print server detected an
internal loopback test error. The print server may be faulty.
If the error persists, replace the HP Jetdirect print server.
03 LAN ERROR -
EXTERNAL
LOOPBACK
The HP Jetdirect print server is incorrectly connected to
your network or is defective. Make sure your HP Jetdirect
print server is correctly attached to your network. In addition,
check the cabling and connectors.
07 LAN ERROR -
CONTROLLER CHIP
(Wired Ethernet) Check the network connections. If the
connections are intact, run the power-on self-test: turn the
printer off, then on again. If the error persists, replace the
HP Jetdirect print server.
07 AUTHENTICATION
FAILED
The Jetdirect print server could not access the network
because of an authentication error. The error depends on
the authentication method used.
Verify the authentication method and settings on the print
server.
08 LAN ERROR -
INFINITE DEFERRAL
There is a network congestion problem.
Note: If the print server is not connected to the network, this
error cannot occur.
08 AUTHENTICATION
IN PROGRESS
Link-level authentication is in progress.
09 LAN ERROR -
BABBLE
Check the network connections. If the connections are
intact, run the power-on self-test: turn the printer off, then
on again. If the error persists, replace the HP Jetdirect print
server. For replacement instructions, see the hardware
installation guide for your print server.
0A LAN ERROR -
NO SQE
(Wired Ethernet) Check the network connections. If the
connections are intact, run the power-on self-test: turn the
printer off, then on again. If the error persists, replace the
HP Jetdirect print server.
Page view 194
1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 231 232

Comments to this Manuals

No comments