HP J7949E User Manual download pdf (Page 69)

ENWW TCP/IP Configuration 69

To use the route command, you will also need the IP address of your

workstation. To view it, you can enter the appropriate command at

the command prompt:

C:\> ipconfig (on Windows NT/2000/XP/Server 2003)

C:\> winipconfig (on Windows 98)

To create a route from the system command prompt, enter the

following command:

where <Jetdirect IP address> is the IP address configured on

the HP Jetdirect print server, and <system IP address> is the

IP address of the workstation's network card that is attached to the

same physical LAN as the print server.

For example, to create a route from your workstation with IP

address 169.254.2.1 to a print server with a default IP address of

192.0.0.192, try this command:

CAUTION Using Telnet to manually set an IP address will

override dynamic IP configuration (such as

BOOTP, DHCP, or RARP), resulting in a static

configuration. In a static configuration, the IP

values are fixed and the operation of BOOTP,

DHCP, RARP and other dynamic configuration

methods may no longer function.

Whenever you are manually changing an IP

address, you should also reconfigure the subnet

mask and default gateway at the same time.

route add <Jetdirect IP Address> <system IP Address>

route add 192.0.0.192 169.254.2.1

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 231 232

No comments

HP J7949E User Manual Page 69