ENWW TCP/IP Configuration 44
Table 3.2 lists the supported TFTP commands (HP Jetdirect
firmware version V.28.xx or later).
Table 3.3
describes the TFTP command parameters.
Table 3.2 List of Supported TFTP Commands (1 of 2)
General
● passwd:
● sys-location:
● sys-contact:
● ssl-state:
● security-reset:
● tftp-parameter-attribute:
TCP/IP Main
● host-name:
● parm-file:
● domain-name:
● pri-dns-svr:
● sec-dns-svr:
● pri-wins-svr:
● sec-wins-svr:
TCP/IP Print Options
● 9100-printing:
● ftp-printing:
● ipp-printing:
● lpd-printing:
● banner:
● interlock:
● buffer-packing:
● write-mode:
● mult-tcp-conn:
TCP/IP Raw Print Ports
● raw-port:
TCP/IP Access Control
● allow: netnum [mask]
TCP/IP Other Settings
● syslog-config:
● syslog-svr:
● syslog-max:
● syslog-priority:
● syslog-facility:
● slp-config:
● slp-keep-alive:
● ttl-slp:
● mdns-config:
● mdns-service-name:
● mdns-pri-svc:
● ipv4-multicast:
● idle-timeout:
● user-timeout:
● ews-config:
● tcp-mss:
● tcp-msl:
● telnet-config:
● default-ip:
● default-ip-dhcp:
● web-refresh:
Comments to this Manuals