HP J7949E User Manual download pdf (Page 108)

ENWW Using the Embedded Web Server 108

Firmware Upgrade

For print servers that support firmware upgrades, this page allows

you to upgrade the print server with new features.

The firmware upgrade file for the print server must be available on

your system. To identify and retrieve the appropriate upgrade file,

visit HP online support at:

http://www.hp.com/go/webjetadmin

_firmware

On that page, do the following:

1. Locate the print server model and the upgrade file.

2. Check the upgrade file version and verify that it is more recent

than the print server’s installed version. If it is, then download

the file. If not, then you do not need to upgrade.

To upgrade the print server using the embedded Web server:

1. Enter the path to the upgrade file or click Browse to locate it.

2. Then click Upgrade Firmware.

LPD Queues

The LPD Queues page allows you to specify LPD (line printer

daemon) print queues on the Jetdirect print server. For more

information on LPD printing and print queues, see Chapter 5,

“Configuring for LPD Printing”.

LPD printing must be enabled on the print server before you can

set LPD queues. If LPD is disabled, go to the Misc. Settings

tab to

enable it.

If LPD printing is enabled, ten different named print queues are

available. Four of these queues are configured automatically and

their parameters cannot be changed. The remaining six queues can

be defined by the user.

The six user-defined queues can be set up with character strings --

such as job control commands -- that are automatically added before

or after the print job. You can define up to eight named strings, and

you can set up each queue so that any of these named strings

precedes the print data (“prepend string name”) or follows the print

data (“append string name”).

LPD Queue Parameters for setting up LPD queues are described

below. See Table 4.6

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 231 232

No comments

HP J7949E User Manual Page 108