Hp ProLiant SL230s Gen8 Server User Manual download pdf (Page 83)

Software and configuration utilities 83

• Support for updating firmware on network-based targets such as the OA, iLO through the Network

Management Port, VC Ethernet and Fibre Channel modules, and 3Gb/6Gb SAS BL Switch

interconnects on HP ProLiant servers

For more information about HP SUM and to access the HP Smart Update Manager User Guide, see the HP

website (http://www.hp.com/go/hpsum/documentation).

HP ROM-Based Setup Utility

RBSU is a configuration utility embedded in HP ProLiant servers that performs a wide range of configuration

activities that can include the following:

• Configuring system devices and installed options

• Enabling and disabling system features

• Displaying system information

• Selecting the primary boot controller

• Configuring memory options

• Language selection

For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the HP website

(http://www.hp.com/support/rbsu).

Using RBSU

To use RBSU, use the following keys:

• To access RBSU, press the F9 key during power-up when prompted.

• To navigate the menu system, use the arrow keys.

• To make selections, press the Enter key.

• To access Help for a highlighted configuration option, press the F1 key.

IMPORTANT: RBSU automatically saves settings when you press the Enter key. The utility does

not prompt you for confirmation of settings before you exit the utility. To change a selected setting,

you must select a different setting and press the Enter key.

Default configuration settings are applied to the server at one of the following times:

• Upon the first system power-up

• After defaults have been restored

Default configuration settings are sufficient for proper typical server operation, but configuration settings can

be modified using RBSU. The system will prompt you for access to RBSU with each power-up.

Auto-configuration process

The auto-configuration process automatically runs when you boot the server for the first time. During the

power-up sequence, the system ROM automatically configures the entire system without needing any

intervention. During this process, the ORCA utility, in most cases, automatically configures the array to a

default setting based on the number of drives connected to the server.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 109 110

No comments

Hp ProLiant SL230s Gen8 Server User Manual Page 83