HP OMEN 27 Display User Manual download pdf (Page 19)

Attaching the VESA mounting bracket

A VESA mounting bracket is included with the monitor for use when attaching the display head to a wall,

swing arm, or other mounting xture.

1. Lay the monitor face down on a at surface covered by a soft clean cloth.

2. Remove the monitor stand if it is attached to the display head. Refer to Removing the monitor stand

on page 12.

3. Insert the VESA mounting bracket into the slot on the back of the display head’s hinge to secure the

bracket to the display head. There will be an audible click when the bracket is properly seated onto the

hinge. Make sure that the bracket is properly secured to the display head before use.

4. To attach the display head to a swing arm or other mounting device, insert four mounting screws

through the holes on the mounting device and into the screw holes on the VESA mounting bracket.

IMPORTANT: Follow the mounting device manufacturer’s instructions when mounting the monitor to a

wall or swing arm.

IMPORTANT: For optimal monitor performance and screen clarity, do not rotate the monitor 90

degrees to portrait orientation.

Setting up the monitor 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

No comments

HP OMEN 27 Display User Manual Page 19