HP E1Z74UT User Manual download pdf (Page 107)

8. If you are not installing a new expansion card, install an expansion slot cover to close the open

slot.

CAUTION: After removing an expansion card, you must replace it with a new card or

expansion slot cover for proper cooling of internal components during operation.

9. To install a new expansion card, hold the card just above the expansion socket on the system

board then move the card toward the rear of the chassis (1) so that the bracket on the card is

aligned with the open slot on the rear of the chassis. Press the card straight down into the

expansion socket on the system board (2).

NOTE: When installing an expansion card, press firmly on the card so that the whole connector

seats properly in the expansion card slot.

10. Rotate the slot cover retention latch back in place to secure the expansion card.

Expansion card

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 244 245

No comments

HP E1Z74UT User Manual Page 107