Hp Designjet T1300 ePrinter User Manual Page 175

  • Download
  • Add to my manuals
  • Print
  • Page
    / 224
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 174
Alternatively, or if you have other print quality problems, you can continue reading this chapter.
Horizontal lines across the image (banding)
If your printed image suffers from added horizontal lines as shown (the color may vary):
1. Check that the paper type you have loaded corresponds to the paper type selected in the front
panel and in your software. See
View information about the paper on page 46.
2. Check that you are using appropriate print-quality settings for your purposes (see
Printing
on page 52). In some cases, you can overcome a print-quality problem merely by selecting a
higher print-quality level. For instance, if you have set the Print Quality slider to Speed, try setting
it to Quality. If you change the print-quality settings, you may wish to reprint your job at this
point in case the problem has been solved.
3. Print the Image Diagnostics Print. See
The Image Diagnostics Print on page 178.
4.
If the printheads are working correctly, go to the front panel and press
and then to see
the paper advance calibration status. If the status is DEFAULT, try performing paper advance
calibration: see
Recalibrate the paper advance on page 161.
If the problem persists despite all the above actions, contact your customer service representative for
further support.
ENWW
Horizontal lines across the image (banding)
167
Page view 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 223 224

Comments to this Manuals

No comments