Hp Designjet T1300 ePrinter User Manual download pdf (Page 165)

other images that do not include margins). This means that, to print a 914 mm (36 in) TIFF, the

printer needs to add margins, and the drawing needs 925 mm (36.4 in) of paper to be printed;

this would cause the job to be put on hold if the paper that is loaded on the printer is only 914

mm (36 in) wide.

If you wish to print these file formats without adding extra margins outside of the drawing, the

Clip contents by margins option can be used. This option will force the margins to be set

inside of the drawing, so a 914 mm (36 in) TIFF can be printed on a 914 mm (36 in) roll of paper

without being put on hold. However, if there is no white space already included in the drawing’s

borders, some contents could be clipped because of the margins.

The roll paper will not advance

If you have pushed the printer up against a wall, the roll may be touching the wall at the rear of the

printer. Use the wall spacers to ensure a minimum distance between printer and wall. See

The wall

spacers on page 8.

The paper has jammed

When a paper jam occurs, you normally see the Possible paper jam message in the front-panel

display.

1. Power off the printer at the front panel and also switch it off at the rear.

2. Open the window.

ENWW

The roll paper will not advance

157

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 223 224

No comments

Hp Designjet T1300 ePrinter User Manual Page 165