Upgrading and Servicing the PC
29
Installing an Add-In Card
1 Insert the new card into the slot and push
straight down. Make sure the card is properly
seated.
2 Attach the screw to secure the card you have
replaced.
3 Connect any external or internal cables
attached to the card.
4 Replace the side panel. See page 5.
Note:
If the new card or device isn’t working, read
through the card manufacturer’s installation
instructions, and recheck all connections,
including those to the card, power supply,
keyboard, and monitor. If the problem still
exists, run the BIOS setup program and load
the default settings, and then save and exit.
Comments to this Manuals