HP Pavilion a6720 Specifications download pdf (Page 25)

Upgrading and Servicing the PC

21

8 Make sure the jumper on the new drive is in

the CS (Cable Select) position. Below is a

drive with a Cable Select jumper installed.

Your drive may vary.

CS SL MA

9 Attach the power cable to the back of the

drive.

10 Make sure you attach the connector marked

Master on the IDE ribbon cable to the back of

the primary hard drive. After this primary

connection is attached, twist the remaining

part of the cable marked Slave on that same

IDE ribbon cable and connect it to the second

hard drive.

Warning:

Make sure the IDE cable

end labeled Master is connected to the

primary hard drive. If you have a second

hard drive, make sure the IDE cable

labeled Slave is connected to the second

hard drive. If the IDE cable is not

connected correctly, the PC will not be

able to locate the hard drives and data

may be lost.

MASTER

SLAVE

To CPU

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments