HP Pavilion a6720 Specifications download pdf (Page 31)

Upgrading and Servicing the PC

27

4 Push straight down on top of the memory

module until it is fully seated in the socket.

The retaining clips on the ends of the socket

automatically lock it into position when the

memory module is fully seated.

5 Replace any cabling that was removed.

6 Replace the side panel. See page 5.

Add-In Cards

At some point, you may want to add a PCI or an

AGP card to the PC to accommodate a new

component, such as a scanner, or to upgrade an

existing card.

Warning:

Do not overload the system

by installing add-in cards that draw

excessive current. The system is designed

to provide 2 amps (average) of +5 V

power for each board/card in the PC. The

total +5 V current draw in a fully loaded

system (one with all add-in card slots

filled) must not exceed the total number

of slots multiplied by 2 amps.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments