28
HP Pavilion home PC
Removing an Add-In Card
1 Remove the side panel that has thumbscrews.
See page 4.
2 Gently lay the PC on its side.
3 To prepare an empty card slot for a new card,
loosen the screw of the expansion slot cover.
Remove the cover of the empty slot.
4 If you are replacing a card, make a note of
any external or internal cables attached to
the card, and then disconnect them.
5 Loosen the screw on the bracket of the card
you are replacing.
6 Hold the bracket and the far top corner of the
card. Carefully remove the card by pulling the
card straight out of the expansion slot.
Warning:
Be careful of the sharp edges
on the expansion slot cover.
Comments to this Manuals