Hp 2910AL User Manual download pdf (Page 483)

100

101

Monitoring and Analyzing Switch Operation

Interface Monitoring Features

ii. Use the Space bar to select the VLAN you want to monitor.

iii. Go to step 10.

8. Use the down arrow key to move the cursor to the Action column for the

individual ports and position the cursor at a port you want to monitor.

9. Press the Space bar to select Monitor for each port and trunk that you want

monitored. (Use the down arrow key to move from one interface to the

next in the Action column.)

10. When you finish selecting ports to monitor, press

[Enter], then press [S] (for

Save) to save your changes and exit from the screen.

11. Return to the Main Menu.

CLI: Configuring Port and Static Trunk Monitoring

Port and Static Trunk Monitoring Commands Used in This Section

show monitor below

mirror-port page B-28

monitor page B-29

You must use the following configuration sequence to configure port and static

trunk monitoring in the CLI:

1. Assign a monitoring (mirror) port.

2. Designate the port(s) and/or static trunk(s) to monitor.

Displaying the Monitoring Configuration.

Syntax: show monitor

This command lists the port assigned to receive monitored

traffic and the ports and/or trunks being monitored.

For example, if you assign port A6 as the monitoring port and configure the

switch to monitor ports A1 - A3, show monitor displays the following:

B-27

1 2 ... 478 479 480 481 482 483 484 485 486 487 488 ... 617 618

Comments to this Manuals

No comments

Hp 2910AL User Manual Page 483

Comments to this Manuals

Related products and manuals for Computer Accessories Hp 2910AL