Hp 2910AL User Manual download pdf (Page 441)

100

101

File Transfers

Transferring Switch Configurations

1. Determine the file name and directory location on the PC.

2. Execute the following command:

3. After you see the above prompt, press

[Enter].

4. Execute the terminal emulator commands to begin the file transfer.

Xmodem: Copying a Configuration File from a Serially

Connected PC or UNIX Workstation

To use this method, the switch must be connected via the serial port to a PC

or UNIX workstation on which is stored the configuration file you want to

copy. To complete the copying, you will need to know the name of the file to

copy and the drive and directory location of the file.

Syntax: copy xmodem startup-config < pc | unix >

copy xmodem config < filename > < pc | unix >

Copies a configuration file from a serially connected PC or

UNIX workstation to a designated configuration file on the

switch. For more on multiple configuration files, refer to

“Multiple Configuration Files” on page 6-23

For example, to copy a configuration file from a PC serially connected to the

switch:

1. Execute the following command:

2. After you see the above prompt, press

[Enter].

3. Execute the terminal emulator commands to begin the file transfer.

4. When the download finishes, you must reboot the switch to implement

the newly downloaded software. To do so, use one of the following

commands:

A-29

1 2 ... 436 437 438 439 440 441 442 443 444 445 446 ... 617 618

Comments to this Manuals

No comments

Hp 2910AL User Manual Page 441

Comments to this Manuals

Related products and manuals for Computer Accessories Hp 2910AL