Hp 2910AL User Manual download pdf (Page 439)

100

101

File Transfers

Transferring Switch Configurations

For example, to upload the current startup configuration to a file named

sw8200 in the configs directory on drive “d” in a TFTP server having an IP

address of 10.28.227.105:

ProCurve# copy startup-config tftp 10.28.227.105

d:\configs\sw8200

TFTP: Copying a Configuration File from a Remote Host

Syntax: copy tftp < startup-config | running-config > < ip-address > < remote-file >

[ pc | unix ]

copy tftp config < filename > < ip-address > < remote-file > [ pc | unix ]

This command can copy a configuration from a remote host

to a designated config file in the switch. For more on multiple

configuration files, refer to “Multiple Configuration Files” on

page 6-23.

(Refer to “Using Primary and Secondary Flash Image

Options” on page 6-13 for more on flash image use.)

For example, to download a configuration file named sw8200 in the configs

directory on drive “d” in a remote host having an IP address of 10.28.227.105:

ProCurve# copy tftp startup-config 10.28.227.105

d:\configs\sw8200

TFTP: Copying a Customized Command File to a Switch

Using the copy tftp command with the show-tech option provides the ability to

copy a customized command file to the switch. When the show tech custom

command is executed, the commands in the custom file are executed instead

of the hard-coded list of commands. If no custom file is found, the current

hard-coded list is executed. This list contains commands to display data such

as the image stamp, running configuration, boot history, port settings, and so

on.

Syntax: copy tftp show-tech <ipv4 or ipv6 address> <filename>

Copy a customized command file to the switch.

ProCurve(config)# copy tftp show-tech 10.10.10.3 commandfile1

A-27

1 2 ... 434 435 436 437 438 439 440 441 442 443 444 ... 617 618

Comments to this Manuals

No comments

Hp 2910AL User Manual Page 439

Comments to this Manuals

Related products and manuals for Computer Accessories Hp 2910AL