Hp 2910AL User Manual download pdf (Page 431)

100

101

File Transfers

Downloading Switch Software

2. Execute the terminal emulator commands to begin the Xmodem transfer.

For example, using HyperTerminal:

a. Click on Transfer, then Send File.

b. Type the file path and name in the Filename field.

c. In the Protocol field, select Xmodem.

d. Click on the

[Send] button.

The download can take several minutes, depending on the baud rate used

in the transfer.

3. When the download finishes, you must reboot the switch to implement

the newly downloaded software. To do so, use one of the following

commands:

Syntax:

boot system flash <primary | secondary>

Reboots from the selected flash.

Syntax:

reload

Reboots from the flash image currently in use.

(For more on these commands, see “Rebooting the Switch” on page 6-18.)

4. To confirm that the software downloaded correctly:

ProCurve> show system

Check the Firmware revision line. It should show the software version that

you downloaded in the preceding steps.

If you need information on primary/secondary flash memory and the boot

commands, refer to “Using Primary and Secondary Flash Image Options” on

page 6-13.

Using USB to Transfer Files to and from the Switch

The switch’s USB port (labeled as Auxiliary Port) allows the use of a USB

flash drive for copying configuration files to and from the switch. Beginning

with software release K_12_XX or later, copy commands that used either tftp

or xmodem, now include an additional option for usb as a source or destination

for file transfers.

A-19

1 2 ... 426 427 428 429 430 431 432 433 434 435 436 ... 617 618

Comments to this Manuals

No comments

Hp 2910AL User Manual Page 431

Comments to this Manuals

Related products and manuals for Computer Accessories Hp 2910AL