Hp 2910AL User Manual download pdf (Page 437)

100

101

File Transfers

Copying Software Images

For example, to copy the primary flash to a TFTP server having an IP address

of 10.28.227.105:

ProCurve# copy flash tftp 10.28.227.105 k0800.swi

where k0800.swi is the filename given to the flash image being copied.

Xmodem: Copying a Software Image from the Switch to a

Serially Connected PC or UNIX Workstation

To use this method, the switch must be connected via the serial port to a PC

or UNIX workstation.

Syntax: copy flash xmodem < pc | unix >

Uses Xmodem to copy a designated configuration file from the

switch to a PC or Unix workstation.

For example, to copy the primary flash image to a serially connected PC:

1. Execute the following command:

Procurve# copy xmodem flash

Press ‘Enter’ and start XMODEM on your host...

2. After you see the above prompt, press

[Enter].

3. Execute the terminal emulator commands to begin the file transfer.

USB: Copying a Software Image to a USB Device

To use this method, a USB flash memory device must be connected to the

switch’s USB port.

Syntax: copy flash usb < filename>

Uses the USB port to copy the primary flash image from the

switch to a USB flash memory device.

For example, to copy the primary image to a USB flash drive:

1. Insert a USB device into the switch’s USB port.

2. Execute the following command:

Procurve# copy flash usb k0800.swi

A-25

1 2 ... 432 433 434 435 436 437 438 439 440 441 442 ... 617 618

Comments to this Manuals

No comments

Hp 2910AL User Manual Page 437

Comments to this Manuals

Related products and manuals for Computer Accessories Hp 2910AL