0.7.01.15 UNREC
OVERABLE condition—EMU hardware failure
The E MU has detected an internal hardware problem. This condition report remains active until the
problem is corrected.
Complete the fol
lowing procedure to correct this problem:
1. Record all six c
haracters of the condition report.
2. Reset the EMU.
3. Observe the EMU to ensure the error d oes not recur within the first minute.
4. If the error do
es recur, contact your HP authorized service representative. The EMU is inoperative
andmustbereplacedassoonaspossible.
0.7.01.16 INFORMATION condition—EMU internal ESI data corrupted
The EM U ESI data is corrupted. This condition does not affect any other element and no action is required.
0.7.01.17 UN
RECOVERABLE condition—Power shutdown failure
The power supply did not respond to a controller, EMU, or power supply shut down command. Shutting
down the supply is required to prevent overheating.
Complete the following procedure to correct the p roblem:
1. Record all six characters of the condition report.
2. Move the pow
er cord bail lock 1, Figure 49,totheleft.
3. Disconnec
t the AC power cord 2 from the supply.
CXO7490
2
3
1
4
Figure 49 Disconnecting AC power
0.7.01.
18 UNRECOVERABLE condition—EMU hardware failure
The E MU has detected an internal hardware problem. This condition report remains active until the
problem is corrected.
Complet
e the following procedure to correct this problem:
1. Record
all six characters of the condition report.
2. Reset the EMU.
3. Observe the EMU to ensure the error d oes not recur within the first minute.
4. If the
error does recur, contact your HP authorized service representative. The EMU is inoperative
andmustbereplacedassoonaspossible.
HP StorageWorks 3000/5000 Enterprise Virtual Array user guide (VCS 4.xxx)
131
Comments to this Manuals